TORONTO--(BUSINESS WIRE)--Arizona Metals Corp. (TSX.V:AMC, OTCQB:AZMCF) (the “Company” or “Arizona Metals”) is pleased to announce the first drill hole from its recently completed 1,748 m drill program at its Sugarloaf Peak Project in La Paz County, Arizona.
Drill hole SP-20-01 intersected 137 m of 0.53 g/t gold from surface, including, 99 m of 0.62 g/t gold, and 30 m of 0.90 g/t gold. From 179.7 m to the end of the hole at 218.5 m, the same hole also intersected 38.8 m of 0.32 g/t gold (Table 1). The hole ended in mineralization.
Table 1. Sugarloaf drill hole SP-20-01 drill results
| Hole ID | From m | To m | Length m | Au g/t |
| SP-20-01 |
0 |
137.6 |
137.6 |
0.53 |
| including |
0 |
98.8 |
98.8 |
0.62 |
| including |
43.5 |
73.5 |
29.9 |
0.90 |
| and |
179.7 |
218.5 |
38.8 |
0.32 |
This hole intersected gold mineralization approximately 45 m below holes drilled by previous operators in 1990 (Cominco) and 2011 (Choice Gold).
Drill core from hole SP-20-01 and SP-20-02 (drilled to a depth of 369 m with assays pending) will be sent to Kappes Cassiday and Associates of Reno, Nevada, to undergo bottle-roll and column testing of gold recoveries by leaching. Samples will also be sent to ALS Minerals in Reno, Nevada for gold assay, multi-element testing, and spectral analysis to determine trace-element levels and hydrothermal alteration variations.
Another two cored drill holes (assays pending), SP-20-03 and SP-20-04, were extended to depths of 572 m and 581 m, respectively, to intersect a large , untested geophysical target (Figure 1) that the Company believes has the potential to host a higher grade “feeder” zone, that could be the source of the disseminated mineralization identified at surface in the historic estimate*. The locations, dips, and azimuths of the four drilled holes are detailed in Table 2 below.
The geophysical target is based on induced polarization (IP) data showing coincident high chargeability and high resistivity. Chargeability high anomalies often indicate the presence of sulfide minerals such as pyrite, and resistivity highs may indicate alteration minerals such as quartz. The mineralization identified to date at Sugarloaf contains both pyrite and quartz.
Table 2. Sugarloaf planned drill hole locations and orientations
| HOLE COLLARS | |||||||||
| Site ID | HoleID | Size | Easting | Northing | Azimuth | Dip | Elevation_m | Planned Depth_m | Actual Depth_m |
| SP20-C | SP20-01 | PQ |
747614 |
3725026 |
180.0 |
-45.0 |
385.6796 |
152 |
226.77 |
| SP20-B | SP20-02 | PQ+HQ |
747685 |
3725019 |
0.0 |
-70.0 |
390.7617 |
152 |
368.8 |
| SP20-V | SP20-03 | HQ |
747884 |
3725311 |
0.0 |
-90.0 |
374.9969 |
457 |
571.5 |
| SP20-E | SP20-04 | HQ |
747600 |
3724920 |
54.0 |
-57.0 |
388 |
549 |
580.64 |
|
1310 |
1747.71 |
||||||||
Sugarloaf Peak Highlights
- Project is 100% owned by Arizona Metals Corp. with no future payments
- Located on 4,400 acres of BLM claims in mining-friendly La Paz County, Arizona
- Historic estimate of “100 million tons containing 1.5 million ounces gold”* at a grade of 0.5 g/t (Dausinger, 1983, Westworld Resources).
- Heap-leach, open-pit target that starts at surface and is tabular with no dip
- Open for expansion at depth and on strike
- Metallurgical testing (bottle roll) by Kinross (2009) and Agnico (2013) achieved gold recoveries of up to 73% (inline with heap-leach mines currently in operation)
Kay Mine Project, Arizona Update
A total of 20 drill holes have been completed at the Kay Mine, with four holes pending assays at ALS Laboratories in Tucson, Arizona. A downhole electromagnetic survey is currently underway at the Kay Mine and is expected to be complete this month. The results of this survey, along with final assay results, will be used to plan a Phase 2 drill program at the Kay Mine.
About Arizona Metals Corp
Arizona Metals Corp owns 100% of the Kay Mine Property in Yavapai County, which is located on a combination of patented and BLM claims totaling 1,300 acres that are not subject to any royalties. An historic estimate by Exxon Minerals in 1982 reported a “proven and probable reserve of 6.4 million short tons at a grade of 2.2% copper, 2.8 g/t gold, 3.03% zinc, and 55 g/t silver.” The historic estimate at the Kay Mine was reported by Exxon Minerals in 1982. The historic estimate has not been verified as a current mineral resource. None of the key assumptions, parameters, and methods used to prepare the historic estimate were reported, and no resource categories were used. Significant data compilation, re-drilling and data verification may be required by a Qualified Person before the historic estimate can be verified and upgraded to be a current mineral resource. A Qualified Person has not done sufficient work to classify it as a current mineral resource, and Arizona Metals is not treating the historic estimate as a current mineral resource.
The Kay Mine is a steeply dipping VMS deposit that has been defined from a depth of 60 m to at least 900 m. It is open for expansion on strike and at depth.
The Company also owns 100% of the Sugarloaf Peak Property, in La Paz County, which is located on 4,400 acres of BLM claims. Sugarloaf is a heap-leach, open-pit target and has a historic estimate of “100 million tons containing 1.5 million ounces gold” at a grade of 0.5 g/t (Dausinger, 1983, Westworld Resources).
*The historic estimate at the Sugarloaf Peak Property was reported by Westworld Resources in 1983. The historic estimate has not been verified as a current mineral resource. None of the key assumptions, parameters, and methods used to prepare the historic estimate were reported, and no resource categories were used. Significant data compilation, re-drilling and data verification may be required by a Qualified Person before the historic estimate can be verified and upgraded to a current mineral resource. A Qualified Person has not done sufficient work to classify it as a current mineral resource, and Arizona Metals is not treating the historic estimate as a current mineral resource.
The Qualified Person who reviewed and approved the technical disclosure in this release is David Smith, CPG.
Quality Assurance/Quality Control
All of Arizona Metals’ drill sample assay results have been independently monitored through a quality assurance/quality control (“QA/QC”) protocol which includes the insertion of blind standard reference materials and blanks at regular intervals. Logging and sampling were completed at Arizona Metals’ core handling facilities located in Quartzite, Arizona. Drill core was diamond sawn on site and half drill-core samples were securely transported to ALS Laboratories’ (“ALS”) sample preparation facility in Tucson, Arizona. Sample pulps were sent to ALS’s labs in Vancouver, Canada, for analysis.
Gold content was determined by fire assay of a 30-gram charge with ICP finish (ALS method Au-AA23). Silver and 47 other elements were analyzed by ICP methods with four-acid digestion (ALS method ME-MS61). ALS Laboratories is independent of Arizona Metals Corp. and its Vancouver facility is ISO 17025 accredited. ALS also performed its own internal QA/QC procedures to assure the accuracy and integrity of results. Parameters for ALS’ internal and Arizona Metals’ external blind quality control samples were acceptable for the samples analyzed. Arizona Metals is not aware of any drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of the data referred to herein.
This press release contains statements that constitute “forward-looking information” (collectively, “forward-looking statements”) within the meaning of the applicable Canadian securities legislation, All statements, other than statements of historical fact, are forward-looking statements and are based on expectations, estimates and projections as at the date of this news release. Any statement that discusses predictions, expectations, beliefs, plans, projections, objectives, assumptions, future events or performance (often but not always using phrases such as “expects”, or “does not expect”, “is expected”, “anticipates” or “does not anticipate”, “plans”, “budget”, “scheduled”, “forecasts”, “estimates”, “believes” or “intends” or variations of such words and phrases or stating that certain actions, events or results “may” or “could”, “would”, “might” or “will” be taken to occur or be achieved) are not statements of historical fact and may be forward-looking statements. Forward-looking statements contained in this press release include, without limitation, statements regarding the resumption of drilling and the effects of the COVID-19 pandemic on the business and operations of the Company. In making the forward- looking statements contained in this press release, the Company has made certain assumptions. Although the Company believes that the expectations reflected in forward-looking statements are reasonable, it can give no assurance that the expectations of any forward-looking statements will prove to be correct. Known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking statements. Such factors include, but are not limited to: availability of financing; delay or failure to receive required permits or regulatory approvals; and general business, economic, competitive, political and social uncertainties. Accordingly, readers should not place undue reliance on the forward-looking statements and information contained in this press release. Except as required by law, the Company disclaims any intention and assumes no obligation to update or revise any forward-looking statements to reflect actual results, whether as a result of new information, future events, changes in assumptions, changes in factors affecting such forward- looking statements or otherwise.
NEITHER THE TSX VENTURE EXCHANGE (NOR ITS REGULATORY SERVICE PROVIDER) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE
Not for distribution to US newswire services or for release, publication, distribution or dissemination directly, or indirectly, in whole or in part, in or into the United States
"peak" - Google News
August 11, 2020 at 04:00PM
https://ift.tt/30JgMKu
Arizona Metals Corp Announces Drilling at its Sugarloaf Peak Heap-leach Gold-oxide Project in La Paz County, Arizona Intersects 137 m of 0.53 g/t Gold From Surface, Including 99 m of 0.62 g/t Gold, and 30 m of 0.90 g/t Gold. - Business Wire
"peak" - Google News
https://ift.tt/2KZvTqs
https://ift.tt/2Ywz40B
Bagikan Berita Ini
0 Response to "Arizona Metals Corp Announces Drilling at its Sugarloaf Peak Heap-leach Gold-oxide Project in La Paz County, Arizona Intersects 137 m of 0.53 g/t Gold From Surface, Including 99 m of 0.62 g/t Gold, and 30 m of 0.90 g/t Gold. - Business Wire"
Post a Comment